Metall material sifatida chiziqli qo'llanmalar zanglash oson, zanglagandan keyin esa uni saqlash qiyin. Xo'sh, nima qilishimiz kerak? Quyida chiziqli yo'riqnomalarni zangdan saqlash bo'yicha ba'zi maslahatlar mavjud. Sizga ma'lumotnomangizni taqdim etmoqchiman.
1. The stop time is greatly shortened, so that the linear rail is in a state of moving and working at all times, and rust is prevented by increasing the frequency and efficiency of use.
2. It would be great if the scalar of the linear guide can be strictly controlled. As long as the scalar is within the specified range, the service life is generally relatively long. At the same time, it would be perfect if the noise interference on the linear guide can be reduced.
3. When working in a high-speed environment, try to reduce the temperature rise of the motor as much as possible, and do not let the motor sling oil. If the power consumption can be reduced, it would be better to protect the motor.
4. Agar siz uni tozalashni istasangiz, unda demontaj qilingan komponentlar imkon qadar tasniflanishi kerak, chunki turli xil komponentlarni tozalashning turli usullari, nozik tozalash va qo'pol tozalash mavjud. Shu bilan birga, chiziqli qo'llanmani alohida qo'ymaslikka e'tibor bering. Idishda metall to'r birinchi navbatda bufer sifatida ishlatilishi kerak, shunda komponentlar idishdagi iflos moddalar bilan aloqa qilmaydi.
5. If you are working at low temperature, it would be great if you can ensure the spirituality of linear guide start and the spirituality of work in advance, and at the same time, try to keep the output power as small as possible in a low temperature environment.
6. Keep the environment as clean as possible when using it. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide, then the probability of wear can be greatly reduced, and vibration and noise can also be reduced.
In short, the maintenance of linear guides requires patience and persistence. Doing the above points can prevent rust and improve the maintenance effect.
